Hydraulic valve guide press designed to remove used valve guides from the cylinder head, assemble or disassemble valve springs, or insert new valve seats.
The table can slide back and forth and is fitted with a tilting cradle, in order to vertically position the guide.
Sliding head
The press has a sliding head fitted with two hydraulic jacks. The lower jack locates against the bottom of the cylinder head and the upper jack pushes downards at a defined effort matching with the job to do.
Tooling
The machine is supplied with: - 22 dismounting guide pilots for Ø4 mm to Ø12 mm guides (inside diameter) - 7 seat drivers for Ø20 mm à Ø90 mm seats - 3 unmounting springs tools Ø24, Ø30 et Ø38 mm - 2 clamping rods
Space requirement
Width :1550 mm - 61.02"
Height :1980 mm - 77.95"
Net weight approx. :380 Kg - 837 lbs
Depth :900 mm - 35.43"
Head stroke
Horizontal travel :1100 mm - 43.3"
Upper jack travel :150 mm - 5.9"
Lower jack travel :120 mm - 4.72"
Maximum cylinder head size
Depth :415 mm - 16.34"
Width :1350 mm - 53.15"
Connections
Electric power supply :1.6kVA-3x400V-AC+PE-50/60Hz or 1.6kVA-3x230V-AC+PE-50/60 Hz